As I type this posting, my camera is working away outside, hopefully imaging magnificent shooting stars associated with the Lyrid Meteor Shower.
The predicted peak is early morning on April 22. There is the possibility of seeing (in my case, imaging) 12-15 an hour. I'll be happy with one...and extremely happy if the clouds hold off until after I bring my imaging gear inside.
When I first checked the sky at about 9:30 p.m., Friday evening, there was a thick cover of clouds over my area. I assumed my imaging time would be non-existent. However, another check of the sky around 11:30 p.m. provided my eyes with a sky full of stars and very good conditions.
But the conditions were nothing like the quality of the sky early in the morning on April 21. From my backyard in town, I normally see three stars in Ursa Minor. One of the stars, of course, is Polaris. The other two form the far end of the bowl of the dipper. Friday morning I could see all the stars of the Little Dipper. So I setup my camera.
At approximately 2:03 a.m., while I was inside enjoying the warmth, a meteor gracefully displayed its end which was fully captured on my camera. You can't miss the meteor in the image below.
Oddly enough, the meteor shown above is the only meteor I was able to capture Friday morning. My camera clicked its way through around 535 images. In all, I captured the passage of two aircraft, seven satellite transits and one meteor.
The image was taken with a Canon EOS 60D with a Tolkina 12-28 mm Wide Angle zoom attached and set to approximately 14mm. Shooting data was ISO 1600, 15-second exposure and an aperture of f/4. The image was saved in JPG format.
Earlier that morning, I stepped outside to make sure everything was still working strong and as I turned towards my entry door, my eye was drawn to a sporadic meteor entering the atmosphere just south of Jupiter. I followed that meteors trail as it moved northward until it disappeared about 15 degrees above the northern horizon. The meteor was slow and a very pleasing yellowish gold in color. It didn't leave a train, but at times, small bits seemed to fall off and instantly burn up.
It was only the second Earth-grazing meteor I have seen. It traveled across a good three quarters of the sky before disappearing and was visible for a good five seconds.
I initially thought the meteor might have been captured on the upper part of one of my images, but that wasn't to be. However, I do like the one meteor I did capture.
Hopefully my camera is working well and the Lyrid shower is providing me a good show. I'll know in a couple of hours.
Showing posts with label Tolkina. Show all posts
Showing posts with label Tolkina. Show all posts
Saturday, April 22, 2017
Monday, April 17, 2017
An Open Cluster Stack
Those who know about my enjoyment of astronomy, also know I
enjoy meteor photography. I set my camera gear up for all showers, including minor ones, to get that perfect meteor. I have yet to
capture that “Great Nighttime Meteor,” but I keep shooting and trying for that
one shot.
A while back, I purchased a Tolkina wide-angle zoom mainly to use for meteor
photography. However, I also use it for
wide area shooting of the night sky.
Recently, I used it (combined with my Canon EOS 60D) to shoot a dozen images of Melotte 111,
or Collinder 256. To many, the naked eye
open cluster is called the Coma Berenices Cluster. The cluster is located below the bend in
handle of the Big Dipper and about three times the distance the top of the bowl covers…if that
makes sense.
Saturday evening proved to be one of the few clear nights I
have experienced here lately, so I took the recently acquired Celestron SkyMaster
15x70 binoculars outside and pointed towards the cluster. From what I have read, the cluster covers
about 7.5 degrees in the sky.
Unfortunately, the SkyMaster binoculars have a field of view of 4.5
degrees. Wanting to see the entire
cluster in one swell swoop, I decided it was time to break out the Canon.
At the time I decided to photograph the cluster, it had
moved to directly overhead and getting my tripod to point straight up takes a
lot of leg adjusting and balance checking to get things working together. The problem is my tripod is designed mostly for video work and not well suited for working straight up. Once I found the balance point, I took a couple
of test shots, saw that the cluster was most likely in the view and after setting the lens
to 14mm, shot a dozen 10-second exposures.
Since I have yet to have good luck stacking images, I wanted
to practice with these photos using DeepSkyStacker. I have other stacking programs, but they are
the ones I have used in the past with non-impressive results. For the most part, it is the alignment of the
images which have been the problem in the past.
After transferring the images to my computer, I started DSS
on the working computer and opened the User’s Manual for DSS on the laptop for
reference. I really didn’t need to read
much to figure out how to use DSS. It is
rather straight forward if the person doesn’t plan to do a lot of manipulation
of the images prior to and during the stacking process. I just wanted to see a good stack with stars
aligned well.
And that is what I got.
The image below is the results.
My only concern is in the stacking process, a lot of the stars visible in
the original images are not in the final product. I should probably read the manual.
The cluster is located in the lower left area of the image about a quarter of the way from the left edge. It is a small grouping of stars in the image, but through the binoculars, it is spectacular, even if I cannot see the entire cluster.
One other note of interest to no one in particular…today I
began receiving items I ordered which I plan to use during the “Great American
Eclipse” on Aug. 21. Soon as the days
clear here in the Pacific Northwest, I will accustom myself to their usage.
My next trip to the stars will most likely be early morning
on April 22. You guessed it…the Lyrid
Meteor Shower. Although the shower
officially began April 16, and will end on April 25, the peak of the shower is
predicted to be around 3 a.m. April 22.
My camera is ready to go if the weather cooperates.
Friday, April 14, 2017
Practice Makes Perfect...
Yes…it sounds like it is a bit early, but everyone knows the
old saying…practice makes perfect. And I
would like to be as close to perfect as possible on Aug. 21 when the moon will
sweep in front of the sun.
I am somewhat lucky, as I live on the southern edge of the
zone of totality, but I won’t experience the eclipse where I live. I hope to be about 30 miles north of here very
close to the centerline. And I do hope
to get a series of good eclipse photos.
I have never photographed a total eclipse, so what I do on
the day of the eclipse will be a first for me.
However, I will soon have everything I need to make those photos become
a reality and will then start practicing what I need to do. I do wish I had a second Canon body, as that
would make everything a lot easier…maybe I will be able to borrow one between
now and then.
I plan to use the following equipment in search of the
ultimate total solar eclipse photograph.
1 – An ETX-80 Observer
2 -- Helios Solar Glass Filter of 108 mm size
3 – A Revolution Imager connected to a monitor, or a MallinCam SkyRaider AG1.2c Imager-Guider attached to a laptop
4 – Canon EOS 60D
5 – A Tolkina AT-X 12-28 PRO DX wide angle zoom
6 – A Thousand Oaks Optical 77 mm threaded white light
solarlite filter for the lens
Since I will need to remove the solar filter during totality
to image the corona, I will need an easy way to remove the filter without
disturbing where the camera is pointed.
Rather than spend a few moments unscrewing the filter, I have obtained a
set of 77 mm Xume lens and filter holders. I will “lift” the filter off the lens,
shoot the totality phase, then reattach the filter to the lens and continue
shooting the final partial phases.
Should I be able to obtain a second Canon body, I will have my
Canon EF 100-400mm II on that body and using a Tiffen variable neutral density filter, photograph the corona during totality.
Hopefully, I will be able to “stack” the images to get better detail in
the corona.
Now you must be thinking, “What does he need to
practice?” I’ll tell ya…
As I said earlier, I have never photographed a total
eclipse. My main concerns are setting my
equipment up to provide the best images possible. The final part of that will depend on where I
setup for the eclipse itself. Since I
plan to image the entire eclipse, I do need to know what the best focal length
of the wide angle lens will be. That
needs to be determined ahead of time and then used at the shooting site.
The next part I need to practice is the combination of the
ETX-80 and the camera to attach to the telescope. Both will allow “live” view of what the scope
is seeing, but which camera – the Revolution Imager (RI) being a video camera
adapted for astronomical use and the MallinCam being a 1.2 megapixel CMOS camera –
will provide the best image.
A test with the MallinCam several weeks ago on the daylight
moon (see previous post) revealed something I wasn’t counting on…a small field
of view. The sun would also fit in the
field of view, but it would need to be carefully monitored to maintain the
view. I have yet to use the RI, so I do
not know what will be its field of view.
However, I do have a .5 focal reducer.
With it, I should be able to increase the field of view. But the reducer does need to be tested on both
cameras to see which works best.
And finally, the last thing I want to do at the viewing site
is to be figuring out how to use the camera I chose. Once my solar filter for the ETX-80 arrives,
I will be practicing on the sun.
Hopefully there will be some sunspots to image.
I think I have covered most of what I will be doing before
the “Great American Eclipse” occurs. As
I mentioned in the beginning, I live on the southern edge of totality, in
Redmond, Oregon. The best place to view
the eclipse in central Oregon is Madras which is about 30 miles north. However, predictions are for thousands upon
thousands of eclipse fans to arrive in the area of Madras. Since I somewhat know the area, I will be
searching for a decent spot where my friends and I can view the event with the
fewest number of people to interfere with our enjoyment and most importantly,
our equipment.
Besides, I am not a big fan of crowds.
Labels:
Astronomy,
central Oregon,
ETX,
ETX80,
Great American Eclipse,
Helios Solar Filter,
Madras,
MallinCam,
Meade,
Redmond,
Revolution Imager,
SkyRaider AG1.2c,
Thousand Oaks Optical,
Tiffen,
Tolkina,
total eclipse
Subscribe to:
Posts (Atom)
