Showing posts with label total eclipse. Show all posts
Showing posts with label total eclipse. Show all posts

Wednesday, August 30, 2017

Eclipse in Central Oregon

Living in central Oregon has its perks. One of which was I didn’t need to travel far to view the Aug. 21, 2017 Great American Eclipse.

Several days before the eclipse, wildfires sprouted up in this area and there was a fear that smoke would interfere with the grand show. However, those fears melted away as the morning brightened to a beautiful day.

Although I lived within the path of totality, I wanted a little more than the 45 seconds of totality predicted for where I lived. A couple of weeks earlier, a friend of mine and I scouted for areas to view and photograph the eclipse from. We found a nice spot deeper in the Twilight Zone which would provide one minute and 36 seconds of totality and marked the spot.

On the morning of the eclipse, we gathered our gear and headed to the spot only to find we weren’t the only people who thought it was a good spot. Knowing there were places just as good along the road we traveled on, we found another place about a half mile away, set up the equipment and waited.

My plan was to shoot a sequence of images of the eclipse with one camera, and then shoot totality with a second camera. One worked as planned...one didn’t. For some reason, my sequence shots were ruined by the combination of my solar filter and the camera I used. Instead of sharp, clear images of the progressive “Pac-man” sun, I got a series of images which had a nice haze around the sun. I had checked everything a couple of weeks earlier to make sure everything would work as planned, and it did.

However, the night before the eclipse, I borrowed a second camera to use for the sequence shots and failed to check how that camera would respond to the settings I developed with my personal camera days before. Even though the camera was made by the same manufacturer as my camera, it didn’t respond as well as my camera. Lesson learned.

What did work was the sequence shots was the timing. I would say it was perfect, but since I can’t prove how “perfect” the timing was, let’s just say it was very close to what I wanted. My first sequence shot was to be made six minutes before first contact, then six minutes later, another image at first contact and a new image every six minutes until the final shot was made, six minutes after last contact.

During totality, I was going to remove the solar filter, shoot a number of images to use in the sequence, then replace the filter and let the timer do its thing once again. But, I was so concerned with getting images from my camera, which had my 70-300 mm lens on it, that I forgot to remove the filter from the sequence camera and have a nice series of blank images halfway through the sequence. Another lesson learned.

As totality approached, I wanted to get the first Diamond Ring, then totality and finally the second Diamond Ring. With timers set to alert us to various stages of the eclipse, I began shooting and my friend began being awe-inspired. This was my second eclipse, so I knew what to expect. However, at totality, I was amazed at the number of planets I was able to see...Venus, Mercury, Jupiter and possibly Mars, along with several stars were visible. It is something I did not remember from my first total eclipse.  All I remember of that eclipse is the darkness and missing sun.  I was rather young at the time.

I am attaching several of my images from the eclipse. The first image is the first Diamond Ring effect as totality approached. It is a stack of three images taken one after another. Two images of totality follow. The first is a stack of five totality shots and the second is as the camera saw totality. The final image is the second Diamond Ring effect as totality ended.

I used AutoStakkert to stack the images and both were accomplished with a 1.5 drizzle effect. I am still trying to wrap my head around “drizzle” as it applies to astrophotography stacking, so don’t look for an explanation here.





In the grand scheme of things, the “Great American Eclipse” as seen from a dry canyon at the base of Grey Butte in central Oregon was a beautiful event. But not beautiful enough to make me an eclipse chaser. I’ll wait for them to come to me and one will in about six years.

By the way, the star seen in the lower left of the images I believe is Regulus.

On Oct. 14, 2023, an Annular Eclipse will slide through central Oregon. The center line will be about 50 miles south of me and if I am able, I will head in that direction to photograph the phenomena. It will be my second annular eclipse.

My first annular eclipse happened on May 10, 1994 and I timed a trip east to visit family in Illinois to witness the eclipse. It was rather interesting to see a slightly darken sky and that majestic ring around the moon. However, I didn’t have a camera at that time...but I will in 2023.

Skies here are still murky due to heavy smoke, and yesterday I glanced towards the sun about two hours before sunset and it shined in a beautiful ruby red color. I tried to capture what it looked like, but the color just didn’t come through.

Hopefully the smoke will clear someday and I can break out my telescopes once again (see previous post) and enjoy what I see in the night sky.


Until then, here is wishing everyone clear skies and great viewing!




Friday, April 14, 2017

Practice Makes Perfect...

Yes…it sounds like it is a bit early, but everyone knows the old saying…practice makes perfect.  And I would like to be as close to perfect as possible on Aug. 21 when the moon will sweep in front of the sun.

I am somewhat lucky, as I live on the southern edge of the zone of totality, but I won’t experience the eclipse where I live.  I hope to be about 30 miles north of here very close to the centerline.  And I do hope to get a series of good eclipse photos.

I have never photographed a total eclipse, so what I do on the day of the eclipse will be a first for me.  However, I will soon have everything I need to make those photos become a reality and will then start practicing what I need to do.  I do wish I had a second Canon body, as that would make everything a lot easier…maybe I will be able to borrow one between now and then.

I plan to use the following equipment in search of the ultimate total solar eclipse photograph.

1 – An ETX-80 Observer 
2 -- Helios Solar Glass Filter of 108 mm size 
3 – A Revolution Imager connected to a monitor, or a MallinCam SkyRaider AG1.2c Imager-Guider attached to a laptop
4 – Canon EOS 60D 
5 – A Tolkina AT-X 12-28 PRO DX wide angle zoom
6 – A Thousand Oaks Optical 77 mm threaded white light solarlite filter for the lens 

Since I will need to remove the solar filter during totality to image the corona, I will need an easy way to remove the filter without disturbing where the camera is pointed.  Rather than spend a few moments unscrewing the filter, I have obtained a set of 77 mm Xume lens and filter holders.  I will “lift” the filter off the lens, shoot the totality phase, then reattach the filter to the lens and continue shooting the final partial phases.

Should I be able to obtain a second Canon body, I will have my Canon EF 100-400mm II on that body and using a Tiffen variable neutral density filter, photograph the corona during totality.  Hopefully, I will be able to “stack” the images to get better detail in the corona.

Now you must be thinking, “What does he need to practice?”  I’ll tell ya…

As I said earlier, I have never photographed a total eclipse.  My main concerns are setting my equipment up to provide the best images possible.  The final part of that will depend on where I setup for the eclipse itself.  Since I plan to image the entire eclipse, I do need to know what the best focal length of the wide angle lens will be.  That needs to be determined ahead of time and then used at the shooting site.

The next part I need to practice is the combination of the ETX-80 and the camera to attach to the telescope.  Both will allow “live” view of what the scope is seeing, but which camera – the Revolution Imager (RI) being a video camera adapted for astronomical use and the MallinCam being a 1.2 megapixel CMOS camera – will provide the best image.

A test with the MallinCam several weeks ago on the daylight moon (see previous post) revealed something I wasn’t counting on…a small field of view.  The sun would also fit in the field of view, but it would need to be carefully monitored to maintain the view.  I have yet to use the RI, so I do not know what will be its field of view.  However, I do have a .5 focal reducer.  With it, I should be able to increase the field of view.  But the reducer does need to be tested on both cameras to see which works best.

And finally, the last thing I want to do at the viewing site is to be figuring out how to use the camera I chose.  Once my solar filter for the ETX-80 arrives, I will be practicing on the sun.  Hopefully there will be some sunspots to image.

I think I have covered most of what I will be doing before the “Great American Eclipse” occurs.  As I mentioned in the beginning, I live on the southern edge of totality, in Redmond, Oregon.  The best place to view the eclipse in central Oregon is Madras which is about 30 miles north.  However, predictions are for thousands upon thousands of eclipse fans to arrive in the area of Madras.  Since I somewhat know the area, I will be searching for a decent spot where my friends and I can view the event with the fewest number of people to interfere with our enjoyment and most importantly, our equipment.


Besides, I am not a big fan of crowds.