Showing posts with label moon. Show all posts
Showing posts with label moon. Show all posts

Monday, May 8, 2017

Jupiter and the Moon

As the moon rose on the evening May 7, it followed another bright object in the sky...Jupiter. Separated by a little more than three degrees, the pair look mighty fine travelling together.

I brought out the Canon 60D and the Canon 100-400 mm EF-L lens and as the sky faded towards dark, I was able to get this image of the couple.  Jupiter is seen in the upper right area in the full image.


Other than converting the image from Canon RAW to JPG, I also smoothed out the color of the sky. There were a lot of color artifacts which detracted from the actual color of the sky.

After sending the image to a friend of mine in Illinois, he sent back another image from which he was able to determine that the image also showed Jupiter's moon Callisto.  It is difficult to see, but in the full size image, Callisto is located at about 11 o'clock and about a two centimeters from Jupiter.

The camera was tripod mounted and the settings I used to shoot the image were ISO 1000, at f/8 for 1/640 of a second.  The lens was set at 300 mm.

Stormy Days

Along with watching the night skies when clouds aren't hiding everything, I enjoy watching a good thunderstorm.  However, there are normally few severe storms in central Oregon compared to other parts of the United States.

But I was pleasantly surprised when on the evening of May 4, I began seeing lightning flashes southwest of where I live.  I stepped outside to verify what I was seeing and saw flash...flash...flash. Realizing a storm was in progress and moving my way, I prepared my camera and headed to a good vantage point.

Once I found a good place, I began shooting.  I experimented with different settings until I settled on ISO800 with a shutter speed of five seconds and an aperture varying from f/5.6 to f/11.  I chose five second exposures because there was so much lightning that any exposure longer would have over saturated the images with too much light.  All the images were shot with a Canon EOS 60D and a Tolkina 12-28 mm wide angle zoom set at 18 mm.

Most of the lightning was of the cloud-to-cloud variety, with a few distant cloud-to-ground strikes. The storm also moved northward along the mountains 25 miles to my west.  Not all that far north of my town of Redmond, Oregon, the storm turned and headed northeast, giving Madras, Oregon, a night to remember.  But from my vantage point, all I saw was a spectacular light show.

This first set of images shows something I see even less often than thunderstorms in my area...Mammatus clouds.  Mammatus clouds are associated with severe storms and are the bumpy looking clouds which hang down from other clouds.  In the first image, the Mammatus clouds show up in the shadowed area along the upper third of the image.


In this second image, the Mammatus clouds are clearly seen highlighted by the lightning flash.


As I mentioned earlier, most of the lightning was cloud-to-cloud.  I very much enjoyed the way the lightning flashes highlighted the various clouds formations visible during the storm.  But it was the crawlers of cloud-to-cloud lightning which I really enjoyed.  Below are two of the better crawler images.



As nice as these images are (at least to me), they don't come close to my favorite lightning image I shot here years ago.  It was one of three lightning strikes during a short-lived storm, but it was a good one.  You can see the image here.

Tuesday, April 4, 2017

A Daylight Moon and Camera Test

On Sunday, April 2, 2017, I decided I would "play" with a recently acquired camera in daylight.  I wanted to see what I was doing...good or bad.

The camera is a MallinCam SkyRaider AG1.2c (you can find info on it here).  The scope I selected (not that I have that many scopes) was the Meade ETX-80.  I considered using the ETX-125, but laziness made the decision for me...the -80 was in a better position to remove from the storage room.

Since it was a rather nice day with very few clouds in the sky and an almost quarter moon hanging at about 11 o'clock in the east, I decided to practice on it.

After doing a simple solar system alignment of the scope and inputting the moon on the GOTO, I centered the moon in the view of the 26 mm Super Plossl and made sure I had good focus in the eyepiece.  I observed for a short period through several of my eyepieces (all Plossls if you are wondering) and decided I would attempt eyepiece projection and see if I could obtain an image using that system with my Canon EOS 60D.

After striping down all the "not-really-needed" heavy objects on the camera, I slipped the 17 mm eyepiece into the adapter.  The 26 mm was a bit long and protruded into the camera's mirror area and I didn't want to take the chance of damaging the camera, so I used the lowest power eyepiece I had which didn't cause me alarm...which turned out to be the 17 mm.

Sliding the outfit into the eyepiece holder after making sure the moon was still centered in the view, I turned on Live View and attempted to obtain focus.  It never happened.  I'm not sure why I couldn't obtain focus.  As a matter of fact, I saw nothing on the camera's LCD which indicated any light source.  So I removed the Canon camera setup and decided to try the MallinCam SkyRaider.

After starting the laptop (actually, it was a netbook which came with the camera) and making sure the MallinCam software saw the camera, I switched to live view and there was the moon on the screen of the netbook.  However, it was out of focus.  I attempted to get good focus, but found a problem with a daylight test...the sun washed out the netbook screen and I could only tell when the moon was way out of focus.

Since the object of the adventure was to test the camera (and learn how to use it), I began recording what was being shown on the LCD.  Since I couldn't see to focus well, I decided to slowing move focus up and down the scale, stopping for a few seconds after making a slight adjustment in the hopes of getting at least one decent image.  After about one minute of recording, I shut everything down and took everything inside.

Anxious to see what the video looked like, I found where it was saved and doubled clicked it to begin play.  I got a box stating Windows didn't know how to open the file.  I checked to see what type of video file I had created and noticed it was a .ser file.  What in the world is a .ser file I said to no one.

I now know what a .ser file is and after checking the net, found a number of utilities to help process the files, and most importantly, view the files outside of the camera software.

One thing I noticed immediately, was the view of the moon as seen by the camera appeared much larger than it did through the eyepiece alone.  Centering whatever I plan to image will need to be very well done.  Although the moon was poorly centered in most of the frames, I still found a few which were decent enough to show here.  

After picking the best one, I did a bit of sharpening with Faststone's Image Viewer, then converted it to grayscale.  I also cropped it from 1280 x 960 to 900 x 900.


I have a lot to learn about astrophotography, but I like the way this image came out.  By the way, the reason I converted the image to grayscale was because I did not like the color of the sky.  It was a strange blue-green color and I couldn't figure out how to make it more closely match the color of the daytime sky...so I went with grayscale.

Thursday, March 9, 2017

Aldebaran and the Moon

I realize this post is a little late regarding the occultation of Aldebaran, but in my defense, I have no excuse.

I had miscalculated the time of disappearance March 4, but did decide to go out and see how long before the Moon would cover the star.  I took my binoculars with me and raised them to the Moon only to find Aldebaran moments away from disappearing.  I watched the occultation and went back inside and prepared my camera to photograph the reappearance.

I boosted the ISO on my Canon EOS 60D to 6400, selected Aperture Priority, put on the Canon EF 100-400mm f/4.5-5.6L IS II USM lens and opened it up to f/5.6 at 400mm. Several minutes before the predicted reappearance, I went outside and to begin taking photos (handheld) every 30 seconds or so.

Outside I was greeted with high clouds which varied from thin to thick, but moving fast over the Moon.  I was a little disappointed, but started photographing the Moon, hoping to get something.  When it was a good 15 minutes after the predicted appearance of Aldebaran, I called it a night (it was about 20 degrees at the time) and loaded the images on my computer.  After a quick "look-see" of the RAW images, I didn't see anything and worst of all, the high clouds were blowing out a lot of detail.

The next morning I began looking at the images a little closer and attempted to fix the high cloud glare.  I found an adjustment in exposure, combined with a gamma tweak did a decent job of lessening the glare of the clouds. I applied the changes to all the images and began looking through them.  About midway I noticed something in one of the images which looked like Aldebaran peeking out from the side of the Moon.  The next image proved it as it showed Aldebaran a couple of diameters from the lunar limb.

The image below shows the progression of Aldebaran from hidden to fully exposed.  Images which followed the third photo here were too badly blown out due to thicker high clouds.


In the montage, the first image, Aldebaran is still behind the moon.  In the second image, taken at 20:06:52, a small portion of Aldebaran is visible emerging from behind the moon just above the 3 o'clock position.  In the third image, taken approximately one minute later, Aldebaran is fully visible and away from the Lunar limb.  

I live in central Oregon, however a friend of mine who lives south of Chicago also viewed the occultation.  He sent me this information after viewing my montage.

"Your pictures showed exactly what I saw, Aldebaran to the center right of the "round" North latitude lunar sea Mare Serenitatus. The star had the same look I saw. No color, like it was washed out by the Moon's glare. Your picture is exactly what I remember."

He added the only difference was he could see Earthshine from the north Pacific Ocean.


Until the next clear sky moment, keep looking up!

Saturday, February 11, 2017

Feb. 10 and 11, 2017

It's a milestone day!  My first true astro post...

Feb. 10 brought a penumbral lunar eclipse at moonrise.  Since my eastern horizon is rather blocked by tall trees, I waited until I could see the moon well enough to see if the Earth's shadow was visible. Unfortunately, I couldn't see any chance in lunar brightness from the time I began watching and the time the eclipse was predicted to end, which was around 6:45 pm.  But in my defense, I have old eyes and the moon was very bright.

Several hours later, I grabbed the binoculars and went outside to look for Comet 45P/Honda-Mrkos-Pajdušáková.  I had a good idea of where the comet would reside in Hercules and went to the south side of a storage shed on the property where I live.  I tucked myself into the slim shadow of the building and scanned the area below the keystone.  I didn't see 45P, nor did I see anything which looked greenish to my eye.

Once again, the bright moon interfered with what I wanted to do.

I did briefly consider bringing out the camera and tripod, but it would have been difficult to set the tripod in a spot I could frame the image based on several factors...the moonlight, the snow still on the ground and the proximity of the building to about the only place I could setup.

Snow depth is falling finally, and should open my regular observing area soon.  I don't have great sky views here, but I do have a north-northwest to east view of the night sky, and a sliver of a southern sky.  But I do have a nice view above me.

Not sure when my next update will occur, but I do want to give the ETX-125 a maiden voyage.  I spent a few hours this afternoon mating my Lenovo laptop with both the Meade scopes.  I had to order another USB-to-Serial adapter and it arrived in today's mail.  After loading the drivers for the adapter, I made all the connections and was able to control the scopes from the computer on most of the astro programs I have on the computer.  I didn't test the setup on all of them, as I will only be using the Meade Autostar Suite program and C2A to control the scopes.

Well, that is all for today.  Clear skies and no moon, y'all!