Showing posts with label daytime moon. Show all posts
Showing posts with label daytime moon. Show all posts

Wednesday, August 30, 2017

Eclipse in Central Oregon

Living in central Oregon has its perks. One of which was I didn’t need to travel far to view the Aug. 21, 2017 Great American Eclipse.

Several days before the eclipse, wildfires sprouted up in this area and there was a fear that smoke would interfere with the grand show. However, those fears melted away as the morning brightened to a beautiful day.

Although I lived within the path of totality, I wanted a little more than the 45 seconds of totality predicted for where I lived. A couple of weeks earlier, a friend of mine and I scouted for areas to view and photograph the eclipse from. We found a nice spot deeper in the Twilight Zone which would provide one minute and 36 seconds of totality and marked the spot.

On the morning of the eclipse, we gathered our gear and headed to the spot only to find we weren’t the only people who thought it was a good spot. Knowing there were places just as good along the road we traveled on, we found another place about a half mile away, set up the equipment and waited.

My plan was to shoot a sequence of images of the eclipse with one camera, and then shoot totality with a second camera. One worked as planned...one didn’t. For some reason, my sequence shots were ruined by the combination of my solar filter and the camera I used. Instead of sharp, clear images of the progressive “Pac-man” sun, I got a series of images which had a nice haze around the sun. I had checked everything a couple of weeks earlier to make sure everything would work as planned, and it did.

However, the night before the eclipse, I borrowed a second camera to use for the sequence shots and failed to check how that camera would respond to the settings I developed with my personal camera days before. Even though the camera was made by the same manufacturer as my camera, it didn’t respond as well as my camera. Lesson learned.

What did work was the sequence shots was the timing. I would say it was perfect, but since I can’t prove how “perfect” the timing was, let’s just say it was very close to what I wanted. My first sequence shot was to be made six minutes before first contact, then six minutes later, another image at first contact and a new image every six minutes until the final shot was made, six minutes after last contact.

During totality, I was going to remove the solar filter, shoot a number of images to use in the sequence, then replace the filter and let the timer do its thing once again. But, I was so concerned with getting images from my camera, which had my 70-300 mm lens on it, that I forgot to remove the filter from the sequence camera and have a nice series of blank images halfway through the sequence. Another lesson learned.

As totality approached, I wanted to get the first Diamond Ring, then totality and finally the second Diamond Ring. With timers set to alert us to various stages of the eclipse, I began shooting and my friend began being awe-inspired. This was my second eclipse, so I knew what to expect. However, at totality, I was amazed at the number of planets I was able to see...Venus, Mercury, Jupiter and possibly Mars, along with several stars were visible. It is something I did not remember from my first total eclipse.  All I remember of that eclipse is the darkness and missing sun.  I was rather young at the time.

I am attaching several of my images from the eclipse. The first image is the first Diamond Ring effect as totality approached. It is a stack of three images taken one after another. Two images of totality follow. The first is a stack of five totality shots and the second is as the camera saw totality. The final image is the second Diamond Ring effect as totality ended.

I used AutoStakkert to stack the images and both were accomplished with a 1.5 drizzle effect. I am still trying to wrap my head around “drizzle” as it applies to astrophotography stacking, so don’t look for an explanation here.





In the grand scheme of things, the “Great American Eclipse” as seen from a dry canyon at the base of Grey Butte in central Oregon was a beautiful event. But not beautiful enough to make me an eclipse chaser. I’ll wait for them to come to me and one will in about six years.

By the way, the star seen in the lower left of the images I believe is Regulus.

On Oct. 14, 2023, an Annular Eclipse will slide through central Oregon. The center line will be about 50 miles south of me and if I am able, I will head in that direction to photograph the phenomena. It will be my second annular eclipse.

My first annular eclipse happened on May 10, 1994 and I timed a trip east to visit family in Illinois to witness the eclipse. It was rather interesting to see a slightly darken sky and that majestic ring around the moon. However, I didn’t have a camera at that time...but I will in 2023.

Skies here are still murky due to heavy smoke, and yesterday I glanced towards the sun about two hours before sunset and it shined in a beautiful ruby red color. I tried to capture what it looked like, but the color just didn’t come through.

Hopefully the smoke will clear someday and I can break out my telescopes once again (see previous post) and enjoy what I see in the night sky.


Until then, here is wishing everyone clear skies and great viewing!




Tuesday, April 4, 2017

A Daylight Moon and Camera Test

On Sunday, April 2, 2017, I decided I would "play" with a recently acquired camera in daylight.  I wanted to see what I was doing...good or bad.

The camera is a MallinCam SkyRaider AG1.2c (you can find info on it here).  The scope I selected (not that I have that many scopes) was the Meade ETX-80.  I considered using the ETX-125, but laziness made the decision for me...the -80 was in a better position to remove from the storage room.

Since it was a rather nice day with very few clouds in the sky and an almost quarter moon hanging at about 11 o'clock in the east, I decided to practice on it.

After doing a simple solar system alignment of the scope and inputting the moon on the GOTO, I centered the moon in the view of the 26 mm Super Plossl and made sure I had good focus in the eyepiece.  I observed for a short period through several of my eyepieces (all Plossls if you are wondering) and decided I would attempt eyepiece projection and see if I could obtain an image using that system with my Canon EOS 60D.

After striping down all the "not-really-needed" heavy objects on the camera, I slipped the 17 mm eyepiece into the adapter.  The 26 mm was a bit long and protruded into the camera's mirror area and I didn't want to take the chance of damaging the camera, so I used the lowest power eyepiece I had which didn't cause me alarm...which turned out to be the 17 mm.

Sliding the outfit into the eyepiece holder after making sure the moon was still centered in the view, I turned on Live View and attempted to obtain focus.  It never happened.  I'm not sure why I couldn't obtain focus.  As a matter of fact, I saw nothing on the camera's LCD which indicated any light source.  So I removed the Canon camera setup and decided to try the MallinCam SkyRaider.

After starting the laptop (actually, it was a netbook which came with the camera) and making sure the MallinCam software saw the camera, I switched to live view and there was the moon on the screen of the netbook.  However, it was out of focus.  I attempted to get good focus, but found a problem with a daylight test...the sun washed out the netbook screen and I could only tell when the moon was way out of focus.

Since the object of the adventure was to test the camera (and learn how to use it), I began recording what was being shown on the LCD.  Since I couldn't see to focus well, I decided to slowing move focus up and down the scale, stopping for a few seconds after making a slight adjustment in the hopes of getting at least one decent image.  After about one minute of recording, I shut everything down and took everything inside.

Anxious to see what the video looked like, I found where it was saved and doubled clicked it to begin play.  I got a box stating Windows didn't know how to open the file.  I checked to see what type of video file I had created and noticed it was a .ser file.  What in the world is a .ser file I said to no one.

I now know what a .ser file is and after checking the net, found a number of utilities to help process the files, and most importantly, view the files outside of the camera software.

One thing I noticed immediately, was the view of the moon as seen by the camera appeared much larger than it did through the eyepiece alone.  Centering whatever I plan to image will need to be very well done.  Although the moon was poorly centered in most of the frames, I still found a few which were decent enough to show here.  

After picking the best one, I did a bit of sharpening with Faststone's Image Viewer, then converted it to grayscale.  I also cropped it from 1280 x 960 to 900 x 900.


I have a lot to learn about astrophotography, but I like the way this image came out.  By the way, the reason I converted the image to grayscale was because I did not like the color of the sky.  It was a strange blue-green color and I couldn't figure out how to make it more closely match the color of the daytime sky...so I went with grayscale.